Mô Đun Không Dây Kỹ Thuật Số Gt-24 Smd 2.4g Nrf24L01 + Pa + Lna
Thương hiệu: OEM | Xem thêm Loa di động OEM Xem thêm Loa di động bán bởi ideepen.vnMô tả ngắn
Mua Mô Đun Không Dây Kỹ Thuật Số Gt-24 Smd 2.4g Nrf24L01 + Pa + Lna ở đâu?: Còn hàng
: Quốc tế
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô Đun Không Dây Kỹ Thuật Số Gt-24 Smd 2.4g Nrf24L01 + Pa + Lna
The module uses the onboard PCB antenna by default. The chip inductor is soldered to 1, 2 as shown in the figure. If you need to use the ipx carrier to pull out the external antenna, you can put the chip inductor to 1,3 as shown.Model: GT-24
Type:SMD chip
Module size: 30.3 × 14.5mm (including PCB antenna)
Working frequency b and: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step)
Interface method: 1 * 8 * 1.27mm / 2 * 4 * 2.54mm (SMD can also be used with universal board and DuPont line)
Power supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged)
Communication level: 0.7VCC ~ 3.3V (VCC refers to the module supply voltage)
Measuring distance: 1000 meters (clear space, maximum power, height 2 meters, air speed 250k)
Transmit power: 4 levels adjustable (maximum 20dBm, about 100mW at maximum power)
Airspeed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Shutdown current: approx. 30uA (test condition: CE = 0, power-down mode, VDD = 3.0V)
Transmitting current: about 90mA (power supply capacity must be greater than 250m)
Receive current: about 20mA
Antenna form: PCB antenna / ipex carrier antenna
Communication interface: SPI maximum speed up to 10Mbps
Send length: single packet 1 ~ 32 bytes 3 level FIFO
Receive length: single data packet 1 ~ 32 bytes 3-level FIFO
RSSI support: Not supported (only simple packet loss statistics are supported)
Receiving sensitivity: -94dBm @ 250kbp
Working temperature: -40 ~ + 85 ° C (industrial grade)
Storage temperature: -40 ~ + 125 ° C (industrial grade)
Feature:
-GT-24 module is an integrated data transmission module for 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial wireless transceiver.
-This module is equipped with a high-performance PCB antenna, precise impedance matching and nRF24L01P RF chip. Compared with nRF24L01, it has higher reliability, higher power level, longer transmission distance and lower power consumption.
-Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm, working in ISM b and 2.4GHz ~ 2.5GHz.
-The module has sufficient transmission power, good spectral characteristics, small harmonics, small channel crosstalk and ultra-small size. It is a model of all Murata's raw materials and industrial-grade standards.
-2.54mm standard plug-in interface and 1.27mm patch interface are standard spacing, which is convenient for users to use various circuits.
-The GT-24 module is also equipped with a built-in PCB antenna and an IPX carrier external antenna, which greatly enhances the module's freedom characteristics and provides users with the greatest degree of freedom.
Package:
1 x GT-24 Digital Wireless Module
Chi Tiết Sản Phẩm
Kiểu kết nối | Không dây |
---|---|
Kho | 9995 |
Kho hàng | Nước ngoài |
SKU | s4638739281 |
d | 2911 |