IDealHouse new Back Button Attachment Compatible For Ps4 Controller Paddles Gamepad Rear Button Extended Key Adapter

Feature:

1. Programming function setting: long press the SET button for 2 seconds, the LED corresponding to X will flash quickly (4HZ), then short press the M1 or M2 button, the LED light will flash slowly on the screen of the corresponding function (the light sequence is X, O, triangle, square, R3, L3, Right 2, L2, R1, L1), and then press the SET key, the corresponding function will be mapped to M1/2;
For example: when entering the programming mode, press the M1 key to display the LED on R1, then press the SET key again, the LED on R1 will light up, and the function of M1 is R1; programming M2 is similar to the above. 10 LEDs are used as key function indication to indicate the function of the programming key, and up to 2 LED lights can be displayed;
2. Cancel function: Press and hold the SET button for 5 seconds, the programming indication LED will change from flashing quickly to off, and the M1/2 function will be cleared. At this time, the button has no programming function;
3. Programming button memory function: insert the return key expander into the controller, if M1/2 has no function, LED1 will flash slowly (2HZ) for 3 seconds and then turn off, press and hold the SET button to enter programming mode, LED1 will flash quickly; if M1/2 If the last programmed function is stored, the corresponding LED will light up. When the power is turned off, the previous programming function is saved; when the controller is plugged in again, the previous programming function is still retained, and the factory default has no programming function;
4. Turbofunction setting: press and hold the function button and the Turbofunction button at the same time, the function button has a Turbofunction burst function; press the above combination key again to cancel the function of the button Turbofunction. If the Turbofunction is set, after pressing the button, the LED corresponding to the function will flash quickly (4HZ);

Description:
Name: Compatible For PS4 Back Key Extender;
Material: ABS;
Color: Black;
Product size: 91 x 57 x 30mm/3.58 x 2.24 x 1.18 inches;
Product weight: 40g;
Packing list:
1 x Compatible for PS4 handle multi-function back clip
1 x instruction manual
1 x packing box
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.